Cervelo Aspero 2026 geometry

A size-by-size geometry profile with manufacturer provenance and RideDNA consistency-audit context. Use the complete table to compare fit and handling before opening the interactive tools.

Cervelo Aspero 2026 geometry chart

Source: Manufacturer geometry source

Published geometry by size

Provenance: published is present in the manufacturer data; derived is calculated by RideDNA; manual is a staff-entered reference rather than a manufacturer-chart value. “Not published” means the manufacturer did not provide a value for that size.

SizeStackReachHTASTAETTChainstayWheelbaseFront centerBB dropTrailFork offsetAudit context
48 505 mm published370 mm published71.0 ° derived74.5 ° derived512 mm derived425 mm derived990 mm published577 mm published79 mm derived62.0 mm published57 mm published yellow
1 of 5 checks flagged — Front Center Reconciliation shows 2.2mm discrepancy
51 530 mm published379 mm published71.5 ° derived74.0 ° derived532 mm derived425 mm derived999 mm published587 mm published79 mm derived62.0 mm published54 mm published green
All 5 consistency checks passed
54 555 mm published388 mm published72.0 ° derived73.5 ° derived553 mm derived425 mm derived1010 mm published597 mm published76 mm derived62.0 mm published51 mm published green
All 5 consistency checks passed
56 580 mm published397 mm published72.0 ° derived73.0 ° derived575 mm derived425 mm derived1028 mm published614 mm published76 mm derived62.0 mm published51 mm published green
All 5 consistency checks passed
58 605 mm published406 mm published72.0 ° derived73.0 ° derived591 mm derived425 mm derived1046 mm published631 mm published74 mm derived62.0 mm published51 mm published green
All 5 consistency checks passed
61 630 mm published415 mm published72.0 ° derived73.0 ° derived608 mm derived425 mm derived1063 mm published648 mm published74 mm derived62.0 mm published51 mm published green
All 5 consistency checks passed

Audit context

Overall consistency: yellow. This context is shown alongside the table so a rider can distinguish a complete published specification from a value that RideDNA had to derive or could not independently verify.

The Cervelo Aspero geometry reconciles within ±1mm engineering tolerance across all checks on five of six sizes. Size 48 shows a 2.2mm data inaccuracy in the published front center value. The manufacturer's use of intentionally different fork offsets across the size run (48mm–57mm) is an engineering choice to maintain consistent handling feel across a wide head tube angle range and does not represent a specification error.

Next steps

More Cervelo geometry profiles