Moots Routt RSL 2026 geometry

A size-by-size geometry profile with manufacturer provenance and RideDNA consistency-audit context. Use the complete table to compare fit and handling before opening the interactive tools.

Moots Routt RSL 2026 geometry chart

Source: Manufacturer geometry source

Published geometry by size

Provenance: published is present in the manufacturer data; derived is calculated by RideDNA; manual is a staff-entered reference rather than a manufacturer-chart value. “Not published” means the manufacturer did not provide a value for that size.

SizeStackReachHTASTAETTChainstayWheelbaseFront centerBB dropTrailFork offsetAudit context
50 560 mm published366 mm published70.3 ° derived75.0 ° derived520 mm derived437 mm derived1025 mm derived598 mm derived71 mm derived77.9 mm derived47 mm published yellow
1 of 2 checks flagged — Reach Reconciliation shows 2.3mm discrepancy
52 579 mm published366 mm published70.3 ° derived74.3 ° derived530 mm derived437 mm derived1029 mm derived602 mm derived71 mm derived77.9 mm derived47 mm published green
All 2 consistency checks passed
54 587 mm published376 mm published70.5 ° derived74.0 ° derived545 mm derived437 mm derived1039 mm derived612 mm derived71 mm derived76.2 mm derived47 mm published green
All 2 consistency checks passed
55 596 mm published379 mm published70.5 ° derived73.5 ° derived555 mm derived437 mm derived1045 mm derived618 mm derived69 mm derived76.2 mm derived47 mm published green
All 2 consistency checks passed
56 603 mm published385 mm published71.0 ° derived73.3 ° derived570 mm derived437 mm derived1053 mm derived625 mm derived69 mm derived72.9 mm derived47 mm published yellow
1 of 2 checks flagged — Stack Reconciliation shows 3.9mm discrepancy
58 627 mm published392 mm published71.0 ° derived73.0 ° derived585 mm derived437 mm derived1066 mm derived638 mm derived69 mm derived72.9 mm derived47 mm published green
All 2 consistency checks passed
60 647 mm published403 mm published71.5 ° derived72.8 ° derived605 mm derived437 mm derived1079 mm derived651 mm derived68 mm derived69.6 mm derived47 mm published green
All 2 consistency checks passed

Audit context

Overall consistency: yellow. This context is shown alongside the table so a rider can distinguish a complete published specification from a value that RideDNA had to derive or could not independently verify.

Geometry reconciliation applies a 21mm integrated headset top cap correction to both stack and reach before comparison against the engine's forward-model calculations. Geometry reconciliation includes a confirmed 19mm external lower headset cup (ELBC); stack calculations have been resolved using this confirmed cup height. Stack reconciles within ±1mm engineering tolerance on six of seven sizes; size 56 shows a 3.9mm data inaccuracy in the published value. Reach reconciles within ±1mm engineering tolerance on six of seven sizes; size 50 shows a 2.3mm data inaccuracy in the published value.

Next steps