bike geometry
P3 2026
Compare size-specific bike geometry, including reach, stack, angles, wheelbase and the measurements that influence fit and handling.
Specialized › P3 › Standard › P3
P3 geometry measurements
Choose the recorded size and configuration. Geometry figures can change by size; RideDNA does not collapse those values into one misleading answer.
What is the reach of the P3?
Reach is the horizontal distance from the bottom bracket to the top of the head tube. Also searched as frame reach.
| Configuration | Size | Reach | Source |
|---|---|---|---|
| P3 geometry | P3 | 415.4 mm | RideDNA-derived |
What is the stack of the P3?
Stack is the vertical distance from the bottom bracket to the top of the head tube. Also searched as frame stack.
| Configuration | Size | Stack | Source |
|---|---|---|---|
| P3 geometry | P3 | 562 mm | RideDNA-derived |
What is the effective top tube of the P3?
Effective top tube is the horizontal distance between the head-tube and seat-tube centerlines. Also searched as ETT, virtual top tube, horizontal top tube.
| Configuration | Size | Effective top tube | Source |
|---|---|---|---|
| P3 geometry | P3 | 598 mm | RideDNA-derived |
What is the head tube angle of the P3?
Head tube angle describes the steering-axis angle relative to the ground. Also searched as HTA, head angle, steering angle.
| Configuration | Size | Head tube angle | Source |
|---|---|---|---|
| P3 geometry | P3 | 68.5 ° | RideDNA-derived |
What is the seat tube angle of the P3?
Seat tube angle describes the seat-tube angle relative to the ground. Also searched as STA, seat angle, effective seat angle.
| Configuration | Size | Seat tube angle | Source |
|---|---|---|---|
| P3 geometry | P3 | 72 ° | RideDNA-derived |
What is the wheelbase of the P3?
Wheelbase is the distance between the front and rear wheel axles. Also searched as axle-to-axle length.
| Configuration | Size | Wheelbase | Source |
|---|---|---|---|
| P3 geometry | P3 | 1052.2 mm | RideDNA-derived |
What is the chainstay length of the P3?
Chainstay length, also called rear center, is the distance from the bottom bracket to the rear axle. Also searched as Chainstay, rear center, rear centre.
| Configuration | Size | Chainstay length | Source |
|---|---|---|---|
| P3 geometry | P3 | 384.4 mm | RideDNA-derived |
What is the bottom bracket height of the P3?
Bottom bracket height is the vertical distance from the ground to the bottom bracket. Also searched as BB height.
| Configuration | Size | Bottom bracket height | Source |
|---|---|---|---|
| P3 geometry | P3 | 310.8 mm | RideDNA-derived |
What is the front center of the P3?
Front center is the distance from the bottom bracket to the front wheel axle. Also searched as front centre.
| Configuration | Size | Front center | Source |
|---|---|---|---|
| P3 geometry | P3 | 668.2 mm | RideDNA-derived |
What is the fork offset of the P3?
Fork offset is the perpendicular distance between the steering axis and the front axle. Also searched as fork rake, rake.
| Configuration | Size | Fork offset | Source |
|---|---|---|---|
| P3 geometry | P3 | 37 mm | RideDNA-derived |
What is the head tube length of the P3?
Head tube length is the measured length of the frame's head tube. Also searched as Head tube, head tube.
| Configuration | Size | Head tube length | Source |
|---|---|---|---|
| P3 geometry | P3 | 115 mm | RideDNA-derived |
What is the seat tube length of the P3?
Seat tube length is the recorded length of the frame's seat tube; measurement conventions can differ by manufacturer. Also searched as Seat tube, seat tube, frame size.
| Configuration | Size | Seat tube length | Source |
|---|---|---|---|
| P3 geometry | P3 | 335 mm | RideDNA-derived |
What is the standover height of the P3?
Standover height is the ground-to-top-tube height at the manufacturer's stated measurement point. Also searched as Standover, stand over height, standover clearance.
| Configuration | Size | Standover height | Source |
|---|---|---|---|
| P3 geometry | P3 | 751.1 mm | RideDNA-derived |
What is the fork length of the P3?
Fork length is the axle-to-crown distance recorded for the fork. Also searched as axle to crown, A2C.
| Configuration | Size | Fork length | Source |
|---|---|---|---|
| P3 geometry | P3 | 480 mm | RideDNA-derived |
What is the wheel flop of the P3?
Wheel flop is a calculated steering-geometry value based on trail and head tube angle. Also searched as flop.
| Configuration | Size | Wheel flop | Source |
|---|---|---|---|
| P3 geometry | P3 | 31.1 mm | RideDNA-derived |
Geometry
Available sizes: P3.
P3 geometry
Jump to size: P3
| Size | Reach | Stack | ETT | HTA | STA | Trail | Wheelbase | Chainstay | BB drop | BB height | Front center | Fork offset | Head tube | Seat tube | Standover | Fork length | Wheel flop | Max tire |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P3 | 415.4 mm | 562 mm | 598 mm | 68.5 ° | 72 ° | — | 1052.2 mm | 384.4 mm | — | 310.8 mm | 668.2 mm | 37 mm | 115 mm | 335 mm | 751.1 mm | 480 mm | 31.1 mm | — |
Length measurements are in millimeters; HTA and STA are in degrees. ETT means effective top tube.
RideDNA-derived values
These deterministic calculations use the recorded manufacturer inputs above. They are separate from manufacturer facts and are not fit recommendations.
- P3 geometry size P3 stack Reach Ratio: 1.35
Bike details
- competitor Model Id
- 7a081ba7-6a28-44be-bcfd-1f16d83a79ba