ENVE MOG 2026 geometry

A size-by-size geometry profile with manufacturer provenance and RideDNA consistency-audit context. Use the complete table to compare fit and handling before opening the interactive tools.

ENVE MOG 2026 geometry chart

Source: Manufacturer geometry source

This profile is available for riders, but it is not currently indexed because its published geometry is not fully independently verified. Values marked derived are calculated by RideDNA; values marked published are transcribed from the manufacturer chart.

Published geometry by size

Provenance: published is present in the manufacturer data; derived is calculated by RideDNA; manual is a staff-entered reference rather than a manufacturer-chart value. “Not published” means the manufacturer did not provide a value for that size.

SizeStackReachHTASTAETTChainstayWheelbaseFront centerBB dropTrailFork offsetAudit context
49 520 mm published367 mm published71.0 ° derived74.5 ° derived511 mm derived420 mm derived993 mm published580 mm published77 mm derived65.5 mm published57 mm published yellow
1 of 5 checks flagged — Front Center Reconciliation shows 4.7mm discrepancy
52 543 mm published378 mm published71.0 ° derived74.0 ° derived534 mm derived420 mm derived1012 mm published599 mm published77 mm derived65.6 mm published57 mm published yellow
1 of 5 checks flagged — Front Center Reconciliation shows 5mm discrepancy
54 565 mm published389 mm published71.3 ° derived73.8 ° derived554 mm derived420 mm derived1027 mm published613 mm published75 mm derived66.0 mm published55 mm published red
1 of 5 checks flagged — Front Center Reconciliation shows 5.3mm discrepancy
56 587 mm published397 mm published71.3 ° derived73.5 ° derived571 mm derived420 mm derived1042 mm published629 mm published75 mm derived66.0 mm published55 mm published yellow
1 of 5 checks flagged — Front Center Reconciliation shows 4.4mm discrepancy
58 605 mm published405 mm published71.5 ° derived73.2 ° derived588 mm derived420 mm derived1053 mm published639 mm published73 mm derived66.4 mm published53 mm published yellow
1 of 5 checks flagged — Front Center Reconciliation shows 4.4mm discrepancy
60 630 mm published415 mm published71.5 ° derived72.8 ° derived611 mm derived420 mm derived1071 mm published657 mm published73 mm derived66.4 mm published53 mm published yellow
1 of 5 checks flagged — Front Center Reconciliation shows 4.7mm discrepancy

Audit context

Overall consistency: red. This context is shown alongside the table so a rider can distinguish a complete published specification from a value that RideDNA had to derive or could not independently verify.

The ENVE MOG geometry specification shows strong internal consistency across stack, reach, and wheelbase — all sizes reconcile within ±1mm engineering tolerance. Front center shows systematic 4.4–5.3mm data inaccuracies in the published values across all six sizes. Trail reconciles within ±1mm engineering tolerance across all sizes. The manufacturer's published front center values are not internally consistent with the published reach and wheelbase geometry — the BB position implied by the published front center differs from the position established by the published ETT, reach, and wheelbase values.

Next steps

More ENVE geometry profiles