Pinarello Dogma F 2026 complete geometry

A size-by-size geometry profile with manufacturer provenance and RideDNA consistency-audit context. Use the complete table to compare fit and handling before opening the interactive tools.

Published geometry by size

Provenance: published is present in the manufacturer data; derived is calculated by RideDNA; manual is a staff-entered reference rather than a manufacturer-chart value. “Not published” means the manufacturer did not provide a value for that size.

Size	Stack	Reach	HTA	STA	ETT	Chainstay	Wheelbase	Front center	BB drop	Trail	Fork offset	Audit context
430	502 mm published	352 mm published	69.5 ° derived	74.4 ° derived	500 mm derived	407 mm derived	974 mm derived	576 mm derived	67 mm derived	76.6 mm derived	47 mm published	red
1 of 2 checks flagged — Reach Reconciliation shows 7.7mm discrepancy
465	517 mm published	365 mm published	70.5 ° derived	74.4 ° derived	515 mm derived	407 mm derived	978 mm derived	582 mm derived	72 mm derived	70.2 mm derived	47 mm published	yellow
1 of 2 checks flagged — Reach Reconciliation shows 4.7mm discrepancy
500	525 mm published	372 mm published	71.4 ° derived	74.0 ° derived	525 mm derived	407 mm derived	977 mm derived	581 mm derived	72 mm derived	64.5 mm derived	47 mm published	green
All 2 consistency checks passed
515	532 mm published	378 mm published	72.0 ° derived	73.7 ° derived	535 mm derived	407 mm derived	979 mm derived	583 mm derived	72 mm derived	60.7 mm derived	47 mm published	green
All 2 consistency checks passed
530	542 mm published	383 mm published	72.5 ° derived	73.7 ° derived	545 mm derived	407 mm derived	984 mm derived	588 mm derived	72 mm derived	57.6 mm derived	47 mm published	yellow
1 of 2 checks flagged — Reach Reconciliation shows 3mm discrepancy
540	551 mm published	385 mm published	72.8 ° derived	73.4 ° derived	550 mm derived	408 mm derived	985 mm derived	588 mm derived	72 mm derived	55.7 mm derived	47 mm published	green
All 2 consistency checks passed
550	562 mm published	389 mm published	72.8 ° derived	73.4 ° derived	557 mm derived	408 mm derived	992 mm derived	595 mm derived	72 mm derived	55.7 mm derived	47 mm published	green
All 2 consistency checks passed
560	570 mm published	391 mm published	73.2 ° derived	73.0 ° derived	565 mm derived	409 mm derived	993 mm derived	595 mm derived	72 mm derived	53.3 mm derived	47 mm published	green
All 2 consistency checks passed
575	585 mm published	397 mm published	73.7 ° derived	73.0 ° derived	575 mm derived	409 mm derived	998 mm derived	600 mm derived	72 mm derived	50.2 mm derived	47 mm published	green
All 2 consistency checks passed
595	613 mm published	393 mm published	73.4 ° derived	72.4 ° derived	587 mm derived	409 mm derived	1008 mm derived	608 mm derived	67 mm derived	52.0 mm derived	47 mm published	green
All 2 consistency checks passed
620	652 mm published	410 mm published	73.4 ° derived	72.0 ° derived	620 mm derived	411 mm derived	1037 mm derived	635 mm derived	67 mm derived	52.0 mm derived	47 mm published	green
All 2 consistency checks passed

Audit context

Overall consistency: red. This context is shown alongside the table so a rider can distinguish a complete published specification from a value that RideDNA had to derive or could not independently verify.

Geometry reconciliation applies a 7mm integrated headset top cap correction to both stack and reach before comparison against the engine's forward-model calculations. Stack reconciles within ±1mm engineering tolerance across all eleven sizes. Reach shows a 7.7mm data inaccuracy in the published value on size 430, a 4.7mm data inaccuracy on size 465, and a 3.0mm data inaccuracy on size 530; sizes 500, 515, and 540–620 reconcile within ±1mm engineering tolerance. The systematic reach discrepancies on the smaller sizes indicate internal inconsistency in the published geometry — the root cause cannot be determined from the published geometry data alone.

Pinarello Dogma F 2026 geometry

Published geometry by size

Audit context

Next steps

More Pinarello geometry profiles