Pinarello Dogma X 2026 geometry

A size-by-size geometry profile with manufacturer provenance and RideDNA consistency-audit context. Use the complete table to compare fit and handling before opening the interactive tools.

Pinarello Dogma X 2026 geometry chart

Source: Manufacturer geometry source

This profile is available for riders, but it is not currently indexed because its published geometry is not fully independently verified. Values marked derived are calculated by RideDNA; values marked published are transcribed from the manufacturer chart.

Published geometry by size

Provenance: published is present in the manufacturer data; derived is calculated by RideDNA; manual is a staff-entered reference rather than a manufacturer-chart value. “Not published” means the manufacturer did not provide a value for that size.

SizeStackReachHTASTAETTChainstayWheelbaseFront centerBB dropTrailFork offsetAudit context
430 524 mm published349 mm published70.0 ° derived74.4 ° derived505 mm derived422 mm derived967 mm published576 mm derived77 mm derived74.8 mm derived47 mm published red
2 of 3 checks flagged — Reach Reconciliation shows 8.4mm discrepancy
465 536 mm published358 mm published70.0 ° derived74.4 ° derived515 mm derived422 mm derived980 mm published587 mm derived77 mm derived74.8 mm derived47 mm published red
2 of 3 checks flagged — Reach Reconciliation shows 6.5mm discrepancy
500 542 mm published365 mm published70.5 ° derived74.0 ° derived525 mm derived422 mm derived987 mm published589 mm derived77 mm derived71.6 mm derived47 mm published red
2 of 3 checks flagged — Wheelbase Reconciliation shows 11.5mm discrepancy
515 549 mm published372 mm published71.0 ° derived73.7 ° derived535 mm derived422 mm derived991 mm published591 mm derived77 mm derived68.4 mm derived47 mm published red
2 of 3 checks flagged — Wheelbase Reconciliation shows 10.4mm discrepancy
530 559 mm published379 mm published71.5 ° derived73.7 ° derived545 mm derived422 mm derived997 mm published597 mm derived77 mm derived65.2 mm derived47 mm published red
1 of 3 checks flagged — Wheelbase Reconciliation shows 9.8mm discrepancy
540 568 mm published381 mm published72.0 ° derived73.4 ° derived552 mm derived422 mm derived999 mm published596 mm derived77 mm derived62.0 mm derived47 mm published red
1 of 3 checks flagged — Wheelbase Reconciliation shows 7.2mm discrepancy
550 579 mm published383 mm published72.0 ° derived73.4 ° derived557 mm derived422 mm derived1004 mm published602 mm derived77 mm derived62.0 mm derived47 mm published red
1 of 3 checks flagged — Wheelbase Reconciliation shows 7.3mm discrepancy
560 588 mm published385 mm published72.5 ° derived73.0 ° derived565 mm derived422 mm derived1004 mm published601 mm derived77 mm derived58.9 mm derived47 mm published red
1 of 3 checks flagged — Wheelbase Reconciliation shows 6.5mm discrepancy
575 602 mm published391 mm published72.8 ° derived73.0 ° derived575 mm derived422 mm derived1012 mm published608 mm derived77 mm derived57.0 mm derived47 mm published red
1 of 3 checks flagged — Wheelbase Reconciliation shows 5.8mm discrepancy
595 632 mm published395 mm published73.0 ° derived72.4 ° derived595 mm derived422 mm derived1025 mm published619 mm derived72 mm derived55.7 mm derived47 mm published red
1 of 3 checks flagged — Wheelbase Reconciliation shows 5.5mm discrepancy
620 670 mm published404 mm published73.0 ° derived72.0 ° derived620 mm derived422 mm derived1048 mm published639 mm derived72 mm derived55.7 mm derived47 mm published yellow
1 of 3 checks flagged — Wheelbase Reconciliation shows 2.7mm discrepancy

Audit context

Overall consistency: red. This context is shown alongside the table so a rider can distinguish a complete published specification from a value that RideDNA had to derive or could not independently verify.

Geometry reconciliation applies a 11mm integrated headset top cap correction to both stack and reach before comparison against the engine's forward-model calculations. Stack reconciles within ±1mm engineering tolerance across all eleven sizes. Reach shows data inaccuracies on the two smallest sizes (430mm and 465mm), ranging from 6.5mm to 8.4mm, with the remaining nine sizes reconciling within ±1mm engineering tolerance or showing minor discrepancies of 2.3–3.4mm on sizes 500mm and 515mm. Wheelbase exhibits systematic data inaccuracies across ten of eleven sizes, ranging from 5.5mm to 18.7mm, with only size 620mm showing a minor 2.7mm discrepancy within the ±1mm engineering tolerance threshold.

Next steps

More Pinarello geometry profiles