Pinarello Grevil F 2026 complete geometry

A size-by-size geometry profile with manufacturer provenance and RideDNA consistency-audit context. Use the complete table to compare fit and handling before opening the interactive tools.

Published geometry by size

Provenance: published is present in the manufacturer data; derived is calculated by RideDNA; manual is a staff-entered reference rather than a manufacturer-chart value. “Not published” means the manufacturer did not provide a value for that size.

Size	Stack	Reach	HTA	STA	ETT	Chainstay	Wheelbase	Front center	BB drop	Trail	Fork offset	Audit context
470	553 mm published	368 mm published	70.3 ° derived	74.5 ° derived	530 mm derived	430 mm derived	1024 mm published	604 mm published	72 mm derived	72.4 mm published	55 mm manual	red
4 of 5 checks flagged — Reach Reconciliation shows 7.4mm discrepancy
500	568 mm published	376 mm published	70.5 ° derived	74.0 ° derived	545 mm derived	430 mm derived	1034 mm published	615 mm published	72 mm derived	70.7 mm published	55 mm manual	red
4 of 5 checks flagged — Reach Reconciliation shows 5.2mm discrepancy
530	583 mm published	384 mm published	70.8 ° derived	73.8 ° derived	558 mm derived	430 mm derived	1047 mm published	626 mm published	67 mm derived	69.0 mm published	55 mm manual	yellow
4 of 5 checks flagged — Reach Reconciliation shows 3.7mm discrepancy
550	598 mm published	390 mm published	71.8 ° derived	73.5 ° derived	570 mm derived	430 mm derived	1043 mm published	622 mm published	67 mm derived	67.5 mm published	50 mm published	yellow
1 of 5 checks flagged — Trail Reconciliation shows 2.8mm discrepancy
575	614 mm published	398 mm published	72.0 ° derived	73.0 ° derived	587 mm derived	430 mm derived	1053 mm published	632 mm published	67 mm derived	65.9 mm published	50 mm published	yellow
1 of 5 checks flagged — Trail Reconciliation shows 2.8mm discrepancy
600	634 mm published	407 mm published	72.3 ° derived	72.5 ° derived	607 mm derived	430 mm derived	1066 mm published	644 mm published	67 mm derived	64.2 mm published	50 mm published	yellow
1 of 5 checks flagged — Trail Reconciliation shows 2.7mm discrepancy

Audit context

Overall consistency: red. This context is shown alongside the table so a rider can distinguish a complete published specification from a value that RideDNA had to derive or could not independently verify.

Geometry reconciliation applies a 11mm integrated headset top cap correction to both stack and reach before comparison against the engine's forward-model calculations. Stack reconciles within ±1mm engineering tolerance across all sizes. Reach, wheelbase, and front center show systematic discrepancies on sizes 470 and 500 (7.4mm, 5.2mm, and 3.7mm data inaccuracies respectively), diminishing progressively to within tolerance on sizes 550–600. Trail shows consistent 2.7–3.0mm discrepancies across all sizes.

Pinarello Grevil F 2026 geometry

Published geometry by size

Audit context

Next steps

More Pinarello geometry profiles